7.190,00 €
The bike components may not be in line with those indicated in the technical data sheet MORE
The Flexy mtb fs has been created to meet the needs of every biker. The 100 mm rear suspension travel ensures incredible driving safety on any terrain, maintaining a high degree of reactivity and driving agility. The concept of the full suspension frame is based on the new rear triangle, entirely made of carbon. The main technical feature, which can be seen immediately, is the abolition of the rear junction on the low chainstay in order to drastically reduce weight and improve dynamics. Thanks to this solution, the functioning of the frame is particularly appreciated, especially in the race field. The attitude of the carbon and the shape of the chainstays contribute to compensate very well the work done by the junction. The frame is reactive uphill and during the pushing phase, while it is very fluid downhill or on a particularly rough terrain. The rear triangle consists of two halves produced monocoque in autoclave in order to obtain continuity of the carbon fiber in all areas of the back triangle, making it solid and very stable. The chainstay section, compared to the previous model, has been revised and modified to get a more solid and rigid structure, especially in the transversal sense. The new rocker arm is made from a single piece of autoclave-molded multilayer carbon which is then milled to obtain the correct dimensions; it is characterized by a high structural solidity, very important to ensure rigidity, security and movement precision of the linkage system. A hidden but very innovative feature is the replacement of all ball bearings with the new self-lubricating bushings of iglidur®; this solution brings many advantages: less weight, easy maintenance, long life and no lubrication. These bushings are made of special polymers and resist in case of water and mud, always maximum fluidity of suspension. The new FELXY MTB FS has been developed to house the new rear shock absorbers with TRUNNION standard, a new fixing system in which the screws are directly allocated in the shock absorber head. This new standard makes the frame / shock absorber system structurally more rigid. The FELXY MTB FS frame is the only full suspension frame that can be made to measure: the choice to install the shock absorber on the seat tube, allows the geometry of the triangle to be released from the shock absorber system and to have a frame with height, length and steering angle according to the customers’ requests.  Also in the FELXY MTB FS the PAT technology is applied on the top tube: this system gives the frame an incomparable driving comfort even in conditions of “hard” setting of the shock absorbers. The rear disc brake frame connection still remains on the horizontal sheath to ensure greater stiffness during the braking. The M2R geometry, Made 2 Race has been developed by TITICI since its first experiments on the 29 “frames with angles and lengths  aimed at making the 29” frames very agile and speedy
Misura ammortizzatore: 165 x 45 mm
Telaio: 29”
Materiale: Multilayer carbon fiber
Metodo di costruzione: PBW (Progressive Bandage Workmanship)
Sterzo: Tapered
Perno passante: Boost 12x148 mm
Tubo sella: Ø 27,2 mm
Movimento centrale: Press Fit 92
Cavi: Internal
Ammortizzatore: Trunnion standard, Rock Shox Monarch RT3 Trunnion
Escursione posteriore: 100 mm
Rocker arm: Monocoque multilayer carbon
Boccole: Iglidur®
Misure: XS, S, M, L, XL or custom
Colori: Natural Carbon, Pure White
Personalizzazione a richiesta: Monoring, double, Di2, Internal cable for telescopic
Forcella: Rock Shox SID RL 29” Boost
Manubrio: FSA SL-K HB carbon black gray flat 740mm
Attacco Manubrio: FSA SL-K MTB ST gray -12°
Reggisella: FSA SL-K SP carbon MTB gray SB0 27.2x400 ITC/Di2PS
Set Ruote: Vittoria Reaxcion SL
Gruppo Completo: Sram GX 1 x 12 speed
Corona Anteriore: Sram GX 34 t
Pacco Pignoni: Sram GX 10 - 50
Set freni a disco: Sram Guide Ultimate 180 / 160
Sella: San Marco Shortfit open
Copertoni: Vittoria Barzo 29 x 2.25
Manopole: Esi Grip silicon